Wall-Mounted Lean-To Pergola 10 x 10 ft with Retractable Canopy, White

When the patio sits right outside the back door, a lean-to pergola gives you shade without four posts in the way. A wall ledger bolts to the house, two front posts carry the outer beam, and the rafters slope gently outward. Under the rafters a sand-beige canopy glides on rails: pull it out on hot afternoons, push it back into soft folds when you want the sun.

Highlights

Attaches to the house wall with a full-width aluminum ledger – only two front posts

Retractable 180 g/m2 polyester canopy, water-repellent and UV-resistant

White powder-coated aluminum frame that will not rust

Gentle roof pitch so rain runs off the canopy away from the house

Works over a patio, deck or the area outside sliding doors

Specifications

Overall size

10 ft deep x 10 ft wide; 9 ft 2 in at the wall, 8 ft at the front (120 x 118 x 110 in)

Frame

aluminum, white powder coat

Canopy

polyester 180 g/m2, sand-beige, retractable

Wall mounting

ledger with lag bolts for wood framing; masonry anchors sold separately

Wind

retract the canopy in winds above 25 mph

Shipping weight

126 lb (2 boxes)

Assembly: two adults, a ladder, a drill and a stud finder; plan on 4 – 5 hours. The ledger must be fixed into wall studs or a rim joist, not into siding alone. If you are unsure about your wall, ask a local handyman to fit the ledger.

Care: brush off leaves and rinse the canopy with mild soap. Retract the canopy before storms and store it indoors over winter in snowy regions so it lasts more seasons.